---
title: "E1M-X V2N RoHS / REACH / POPs Declaration"
description: "Declaration of Conformity for materials compliance (EU RoHS 3, REACH SVHC, POPs) of the base E1M-X V2N System-on-Module."
source: https://docs.alplab.ai/e1m/e1m-x-v2n/documents/compliance-rohs-reach
subtitle: "Declaration of Conformity — materials compliance"
document: "DC-V2N-001"
revision: "0.4"
date: "November 2026"
status: "Preliminary"
pdf: https://docs.alplab.ai/docs-pdf/e1m-x-v2n-rohs-reach-v0.4.pdf
---

# E1M-X V2N RoHS / REACH / POPs Declaration

## 1 Declaration {#declaration}

:::note[Declaration of Conformity]
**Alp Lab AB** declares, on the basis of the component-supplier declarations referenced in [Section 6](#sec-basis), that the **E1M-X V2N System-on-Module** (Renesas RZ/V2N, base variant, all production revisions) conforms to:

- **EU RoHS 3** — Directive 2011/65/EU as amended by (EU) 2015/863 ([Section 3](#sec-rohs));
- **EU REACH** — Regulation (EC) No 1907/2006, Article 33 (SVHC, [Section 4](#sec-reach));
- **EU POPs** — Regulation (EU) 2019/1021 ([Section 5](#sec-pops)).
:::

:::warning[Status of this issue:]
**Preliminary.** Finalised and signed ([Section 8](#sec-sign)) only once every supplier declaration in [Section 6](#sec-basis) is confirmed on file. Until then it states Alp Lab's **expected** conformity from standard catalogue-part compliance, not a warranted legal declaration.
:::

## 2 Scope {#scope}

Covers the assembled E1M-X V2N module (base variant, Pb-free SAC assembly). The **V2N-M1** variant (with the DeepX accelerator) is covered by DC-V2NM1-001.

**Table 1:** Declaration coverage

| Item | Value |
|---|---|
| Product | E1M-X V2N System-on-Module (base) |
| Assembly process | Pb-free SAC reflow (RoHS-compliant solder) |
| BOM basis | ∼ 1180 placements, ∼ 95 line items, 34 suppliers |
| Issued by | Alp Lab AB |

## 3 RoHS 3 — Restricted Substances {#sec-rohs}

Conforms to 2011/65/EU as amended by (EU) 2015/863. No restricted substance is intentionally present above its maximum concentration value in any homogeneous material, except where covered by an Annex III exemption at component level.

**Table 2:** RoHS 3 restricted substances and maximum concentration values

| Restricted substance | Symbol | Max. (wt% homog.) | Status |
|---|---|---|---|
| Lead | Pb | 0.1% | Conform |
| Mercury | Hg | 0.1% | Conform |
| Cadmium | Cd | 0.01% | Conform |
| Hexavalent chromium | Cr(VI) | 0.1% | Conform |
| Polybrominated biphenyls | PBB | 0.1% | Conform |
| Polybrominated diphenyl ethers | PBDE | 0.1% | Conform |
| Bis(2-ethylhexyl) phthalate | DEHP | 0.1% | Conform |
| Butyl benzyl phthalate | BBP | 0.1% | Conform |
| Dibutyl phthalate | DBP | 0.1% | Conform |
| Diisobutyl phthalate | DIBP | 0.1% | Conform |

Common Annex III exemptions potentially invoked at component level (the module's assembly solder is Pb-free SAC): **6(c)** lead in copper alloy; **7(a)** lead in high-melting solders; **7(c)-I** lead in dielectric/glass of ceramic components; **15(a)** lead in die/carrier solder within IC packages.

## 4 REACH — Substances of Very High Concern {#sec-reach}

Based on the supplier declarations in [Section 6](#sec-basis), **no SVHC on the ECHA Candidate List (as last updated) is intentionally present above 0.1% w/w** in the module as delivered.

:::note[Note:]
The ECHA Candidate List is updated ∼ twice yearly; this declaration is valid against the revision in force at the issue date.
:::

## 5 POPs — Persistent Organic Pollutants {#sec-pops}

Conforms to Regulation (EU) 2019/1021. None of the restricted POPs — SCCPs, PFOS, PFOA and related compounds, HBCDD, and the restricted PBDEs — is intentionally added or present above the applicable limits.

## 6 Basis of Declaration {#sec-basis}

A roll-up of component-supplier declarations (not analytical testing). Conformity rests on the declarations from the manufacturers below.

**Table 3:** Component-supplier compliance basis (declaration tracker)

| Manufacturer | Key component classes | Declaration |
|---|---|---|
| Texas Instruments | Bucks, CAN, mux, temp, logic | Public · filed |
| Murata Electronics | MLCCs, ferrites, Wi-Fi module | Public · filed |
| TDK Corporation | MLCCs | Public · filed |
| Yageo | Chip resistors | Public · filed |
| Winbond Electronics | SPI NAND flash | Public · filed |
| Diodes Incorporated | Load switch | Public · filed |
| Microchip Technology | Clock buffer | Public · filed |
| Samtec | RF connector | Public · filed |
| Renesas | RZ/V2N SoC, DA9292 PMIC, clock gen | Public · locate |
| Micron Technology | LPDDR4 DRAM | Public · locate |
| Realtek | Ethernet PHY (×2) | Public · locate |
| Macronix | OSPI NOR flash | Public · located |
| Kingston Technology | eMMC | Public · locate |
| Qorvo | Multi-output PMIC | Public · locate |
| Rohm Semiconductor | Load switches | Public · locate |
| Nexperia | Level shifter, TVS | Public · locate |
| Analog Devices | RTC (MAX31331) | Public · locate |
| GigaDevice | Companion MCU | Public · locate |
| Infineon | Secure element | Public · locate |
| STMicroelectronics | EEPROM | Public · located |
| onsemi | EEPROM, LDO, NS5A4684 | Public · located |
| Toshiba Elec. Devices | Load switches, LDO | Public · located |
| Samsung Electro-Mechanics | MLCCs, inductors | Public · located |
| Taiyo Yuden | MLCCs, ferrites | Public · located |
| Vishay Dale | Resistors | Public · locate |
| Würth Elektronik | Inductors/magnetics | Public · locate |
| AVX | Capacitors | Public · locate |
| Abracon | Crystals | Public · locate |
| TKD | Crystals | Public · locate |
| ECS Inc. | Crystals | Public · located |
| Micro Crystal AG | RTC | Public · located |
| Seiko Instruments | Supercapacitor | Public · locate |
| Kinetic Technologies | LED driver | Public · located |
| Delta Electronics / Cyntec | Power inductor | Public · located |

:::note[Note:]
**filed** — PDF in the evidence file (shared with E1M-AEN where the supplier is common); **located** — public source identified, retrieve by MPN; **locate** — vendor publishes, exact PDF not yet pulled. All suppliers publish a public declaration; the declaration is issued **Released** once all PDFs are on file and the signatory has signed.
:::

## 7 Validity & Limitations {#validity-limitations}

1. **Roll-up, not test** — asserted from supplier declarations.
2. **Per-revision issue** — a BOM change triggers re-evaluation and re-issue.
3. **Regulatory currency** — valid against the RoHS exemption / REACH Candidate List state at the issue date.
4. **Scope boundary** — module as delivered only.

## 8 Authorisation {#sec-sign}

Signed for and on behalf of **Alp Lab AB**:

Signature: ______________________

Name: ______________________

Title: ______________________

Date: ______________________

Place: ______________________

## 9 Revision History {#revision-history}

**Table 4:** Document revision history

<table>
<thead>
<tr><th>Revision</th><th>Changes</th><th>Date</th></tr>
</thead>
<tbody>
<tr>
<td>0.1</td>
<td>
<ul>
<li>Initial preliminary declaration from the released E1M-X V2N BOM (base variant, 34 suppliers).</li>
<li>8 suppliers filed (shared with E1M-AEN).</li>
<li>Awaiting remaining declarations and signature.</li>
</ul>
</td>
<td>June 2026</td>
</tr>
<tr>
<td>0.2</td>
<td>
<ul>
<li>Release history: every entry formatted as a bullet list.</li>
</ul>
</td>
<td>October 2026</td>
</tr>
<tr>
<td>0.3</td>
<td>
<ul>
<li>Table of Contents: each entry links to its section; the front-matter lists are set tighter.</li>
</ul>
</td>
<td>October 2026</td>
</tr>
<tr>
<td>0.4</td>
<td>
<ul>
<li>Product name on page 1 links to the product page on alplab.ai.</li>
</ul>
</td>
<td>November 2026</td>
</tr>
</tbody>
</table>
